Vessel 22002N3EVA BALL RATCHET Screwdriver 2-Piece with 3-Piece Replacement Blade Set
Vessel 22002N3EVA BALL RATCHET Screwdriver 2-Piece with 3-Piece Replacement Blade Set
Key Features
Overview
The Vessel 22002N3EVA Ball Ratchet Screwdriver 2-Piece with 3-Piece Replacement Blade Set (Model No. 22002N3EVA) is a ratcheting screwdriver set built for fast, controlled hand driving in service, assembly, and maintenance work. This is a ratcheting screwdriver set designed for tightening and loosening Phillips and slotted screws faster with less wrist movement.
You get two ball-grip ratchet screwdriver handles and three longer replacement blades, so you can run a shorter blade for tighter access or swap in a longer blade when you need reach. The blade sizes in the set cover common shop and field hardware: Phillips #2 in 100 mm and 150 mm lengths, Phillips #3 in 150 mm, and slotted 6 mm in 100 mm and 150 mm lengths.
The ratchet mechanism is made for repetitive work where a traditional screwdriver wastes time on every reset. The 36-tooth gear design (per retailer specifications) is meant to keep the swing arc small so you can keep turning even when you do not have room for a full handle rotation.
Vessel's replaceable-blade format is the real advantage here. When a tip wears, you replace the blade instead of the whole tool, and when the job changes, you change the blade instead of walking back to the box. For techs and maintenance crews, this is a clean way to keep a small screwdriver kit that still covers the screws you actually see day to day.
Jobsite reality check: electric insulation is not guaranteed. If you are working around energized circuits, this is not an insulated screwdriver, so shut off power before use.
If you are the type who does service calls, equipment teardown, assembly benches, or general repairs, this set makes sense because it speeds up common fasteners and keeps your options organized. If you need insulated drivers or specialty electronics sizes, this is not that set.
Vessel 22002N3EVA Ball Ratchet Screwdriver set for faster repetitive fastening
The ball grip gives you a stable palm contact point while the ratchet does the speed work. When you are running a bunch of screws, the tool keeps moving without constant hand repositioning.
- Ratcheting, reversible operation
- 36-tooth gear design (per retailer specifications)
Blade options for reach and access
The included blades cover the common sizes most techs actually grab. The shorter 100 mm blades help in cabinets and equipment housings, and the 150 mm blades give you reach without switching to a full-length driver.
- Phillips #2: 100 mm (4 in) and 150 mm (6 in)
- Phillips #3: 150 mm (6 in)
- Slotted 6 mm: 100 mm (4 in) and 150 mm (6 in)
Stays organized in the truck or drawer
The EVA foam inlay keeps each handle and blade in its own slot, so you can tell at a glance what is missing and what is ready to go.
- Five-piece set with EVA foam storage
- Two ball grip ratchet screwdriver handles plus three replacement blades
What's in the Box
- (1) Ball Ratchet Screwdriver handle with slotted 6 mm x 100 mm blade
- (1) Ball Ratchet Screwdriver handle with Phillips #2 x 100 mm blade
- (1) Replacement blade: slotted 6 mm x 150 mm
- (1) Replacement blade: Phillips #2 x 150 mm
- (1) Replacement blade: Phillips #3 x 150 mm
- (1) EVA foam inlay
Key Specifications
 Total Pieces |
5 |
|---|---|
|
Drive Style |
Ratcheting, reversible |
 Tip Types |
Phillips and slotted |
|
Case Type |
EVA foam inlay |
 Weight |
1.34 lbs |
 Handle Material |
Rubber |
 Made In |
Thailand |
 Electrical Insulation |
Not electrically insulated |
Compatibility
Built For
Pro Tip
When you are in a cabinet or panel with almost no swing room, pop the blade out and run the handle as a stubby ratchet with a 1/4 in hex insert bit. It is a quick way to get ratchet speed where a full driver will not turn.
Warranty & Support
Tool Nut's Take
Fast hand-driving, without juggling five screwdrivers
The Vessel 22002N3EVA Ball Ratchet Screwdriver 2-Piece with 3-Piece Replacement Blade Set is the kind of kit you keep close because it covers the common screws and saves time every day.
- Who it's for: Maintenance techs and serious DIYers doing a lot of Phillips and slotted fastening in tight spaces.
- Why it stands out: Replaceable blades, two handles, and an EVA foam layout that keeps the set organized and ready.
- Worth knowing: It is not an insulated screwdriver set, so do not use it on live electrical work.
Common Questions
- Is this an insulated screwdriver set? No. Electric insulation is not guaranteed; shut off power before use.
- What tip styles and sizes come with the set? Phillips #2 in 100 mm and 150 mm, Phillips #3 in 150 mm, and slotted 6 mm in 100 mm and 150 mm.
- Can it run standard insert bits? Yes. With the blade removed, the handle can accept standard 1/4 in hex insert bits (per retailer listing).
Product features
Product features
Materials and care
Materials and care
Merchandising tips
Merchandising tips
